Please Install Flash Player
Download from here

Serological Water Bath

 
Products Scientific Equipment >> Serological Water Bath

Almicro Serological Water Bath ExportersDouble wall construction, inner being made out of highly polished thick stainless steel and outer made out of thick mild steel sheet finished instoving white enamel paint or staple mat colour combinations. The gap is filled with special glass wool for temp. insulation. The bath is provided with a drain cock to easily drainout the water and Clean the chamber when required. A pyramidal shaped cover is provided.

Immersion type heating elements are fitted at bottom. Temp. range 5°C above ambient to 80°C with accuracy :t 0.5°C to 1°C is controlled by capillary thermostat regulated by a graduated knob on the panel, which is also provided with pilot lamp etc. The equipment is workable on 220V AC 50 Hz single phase. The baths are supplied without racks. thermometer and stirring arrangement.

Chamber Size (Stainless Steel)

    a) 300x175x175mms.(12"x7"x7")

    b) 300x250x175mms.(12"x10"x7") c) 375 x 300 x 175 mms. (15" x 12" x 7") d) 450 x 300 x 175 mms. (18" x 12" x 7") e) 600 x 300 x 175 mms. (24" x 12" x 7"


Optionals: (Extra Cost)

  • Stirring arrangements with S.S. Rod and Blades
  • Digital Temp. Indicator
  • Digital Indicator cum temp. controller
  • Micro Processor PID digital Temperature Indicator Cum Controller



 
* fields are mandatory
ENQUIRY FORM

Enquiry Form
Contact Person Name *  
Company Name *  
Address  
Email  
Country *  
Phone  
Mobile No.  
Fax  
Subject  
Enquiry Details *