Incubator B.O.D.

Designed for low temperature incubation and routine determination of Bio~Chemical oxygen Demand (B.O.D.) Double wall construction. Innner Chamber made of richy anodized aluminium or highly polished stainless steel sheet with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Exterior made out of thick milk steel sheet duly finished in white stoving enamel paint or pastle mat finish colour combinations. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door made out of clearacrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment are filled with glass wool for temp. insulation. The cabinet is mounted on castors. Temperature is controlled by a sensitive
thermostat from 5DC to 50DC 1 DC. For lower temp. working a standard cooling unit with a sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has been made within the chamber for higher temp. working. The temp. can be regulated within the ranged by means or a high precision double action thermo-regulator. Inner air circulating system is provided to achieved uniform temperature in the whole chamber.
A control panel is provided with various indicators, on off switch. L-shaped thermometer. Supplied with cord and plug etc. The equipment is workable on 220V AC 50 Hz single phase.

Chamber Size: Capacity

a) 610x455x410 mms. (24" x 18"x 16")

b) 825x500x415mms. (33"x20"x 16.5") c) 865 x 565x 565 mms. (34.5"x22.5"x22.5")

c) 900 x 650 x 575 mms. (36" x 26" x 23")

Digital Temp. controller cum indicator ii) Timer 0,24 hours day night cycle

Cojair mixture inlet nozzle

Aumatic voltage stabilizer 3KVA (must).

Micro Processor PID digital Temperature Indicator Cum Controller

Internal Illumination with 3 flourocent tubes.